Frequently Asked Questions and Solutions of Glorious Handheld Laser Welding Machines

In current welding, the hand-held laser welding machine has become very common. Due to its convenient operation, portability, rapid welding speed and high product production, it is very popular among users. However, there may be some problems when using a hand-held laser welding machine. Below, Shandong Guangrong Intelligent Technology Co., Ltd. will clarify the common faults of the laser welding machine and how to handle them.

• The solubility of the laser welding machine is not enough

It can be solved by increasing the pulse width and increasing the current, or adjusting the defocus amount close to the point position.

The air flow is solved by reducing the flow rate of the protector, or the temperature of the cooling water is reduced and the water temperature is increased. If there is no cleaning table, you can re-clean the workbench.

• Very deep when the weld is welded in the laser welding machine

Nitrogen or other inert gas is then required to use nitrogen or other inert gas, or regulate the airflow direction of the protector, which is opposite to the moving direction of the workpiece.

• If the laser welding machine is welded, the laser beam is weakened.

It can be solved by changing cooling water. If the main optical path is deviated, the main optical path must be adjusted to adjust the total reply or semi-reflective film.

• If there is an open flame, it will not rebound completely

Then you need to check if there is any remaining oil on the shutter connection.

The above is a common fault and processing method of laser welding machine, Shandong Brilliant Intelligence Technology Co., Ltd., I hope to help everyone.