Advantages of Fiber laser cutting machine

1. High cutting accuracy: The positioning accuracy of the laser cutting machine is 0.05mm, and the repeat positioning accuracy is 0.03mm.

2. The slit of the laser cutting machine is narrow: the laser beam is focused into a small spot, so that the focal point reaches a high power density, and the material is quickly heated to the degree of gasification, which evaporates to form holes. With the relative linear movement of the beam and the material, the holes are continuously formed into narrow slits, and the slit width is generally 0.10-0.20mm.

3. The cutting surface of the laser cutting machine is smooth: there is no burr on the cutting surface, and the surface roughness of the incision is generally controlled within Ra6.5.

4. The speed of the laser cutting machine is fast: the cutting speed can reach 10m/min, and the maximum positioning speed can reach 30m/min, which is much faster than the wire cutting speed.

5. The cutting quality of the laser cutting machine is good: non-contact cutting, the cutting edge is less affected by heat, there is basically no thermal deformation of the workpiece, and the collapse of the edge formed when the material is punched and sheared is completely avoided, and the cutting seam generally does not require secondary processing.

6. No damage to the workpiece: The laser cutting head will not contact the surface of the material to ensure that the workpiece will not be scratched.

7. Not affected by the shape of the workpiece: the laser processing has good flexibility, can process any graphics, and can cut pipes and other special-shaped materials.

8. The laser cutting machine can cut a variety of materials: such as plastic, wood, PVC leather, textiles, plexiglass, etc.

9. Save mold investment: laser processing does not require molds, no mold consumption, no need to repair molds, save time to replace molds, save processing costs, and reduce production costs, especially for the processing of large products.

10. Material saving: Using computer programming, products of different shapes can be cut to maximize the utilization rate of materials.

11. Improve the speed of sample delivery: after the product drawing is formed, laser processing can be carried out immediately, and the physical object of the new product can be obtained in the shortest time.

12. Safety and environmental protection: less waste in laser processing, low noise, clean, safe and pollution-free,